The GV‐DSP LPR is a Linux‐based license plate recognition system built in a small box. Integrating with a Web server, the GV‐DSP LPR can host its own Web site and compare captured license plates either with a standalone database created on GV‐DSP LPR, or a database downloaded from the access control software GV‐ASManager. When there is a match, GV‐DSP LPR will open a gate or barrier.
The GV-DSP LPR can also deliver live view images and recognized plate numbers, date and time to the GV-System for security surveillance.
Các tính năng chính:
Non-PC based solution for 1 port traffic or mobile license plate recognition
Wide operating temperature range
Web-based configuration for image, security settings and firmware upgrade
Recognition triggered by video motion detection or sensor inputs
Opening a gate barrier when a captured license plate matches the database
Manageable by GV-AS Manager access control system
IP address filtering
This application is only supported by GV‐System V8.5.5 or later.
The maximum resolution is 720 x 480 (NTSC) / 720 x 576 (PAL) and the frame rate is 5 (NTSC) / 5 (PAL).
The Wiegand interface is NOT functional.
The GV‐DSP‐LPR V3 (firmware V1.05 or later) does not support UAE engine.
The relay output can only drive a maximum load of DC 5V, 5 mA. Working in conjunction with the GV‐Relay V2 module, it
can drive a heavier load of up to AC 250V 10A, DC 100V 5A.
Specifications are subject to change without notice.